Shop/Primary instruments/iris AiO Gen 2
PRIMARY INSTRUMENTS

iris AiO Gen 2

€719.80
includes €129.80 VAT (22%, Slovenia) · €590.00 excl. VAT
Deliver to

iris Gen 2 all-in-one instrument: fully round LCD, built-in airspeed and altimeter sensors, rotary knob and WiFi configurator in a 57 mm cutout.

1
Volume pricing 3+ −2% · 5+ −4% · 10+ −10%
Made to order · we confirm the dispatch date with your order
— Two-year warranty, factory support
— 15-day returns with proof of purchase
— Ships from Celje, Slovenia
FITS
Ultralight and microlight aircraftExperimental and homebuilt aircraftLight-sport aircraft
CERTIFICATION
Non-TSO, for non-certified installations
IN SHORT
  • Full round display with no covered area
  • Airspeed, altimeter, VSI, G-force and chrono functions switched on in the configurator
  • Built-in configuration portal over WiFi — no CAN2WiFi — with IAS, TAS and CAS calibration
  • Firmware updates over built-in WiFi
  • Password-protected configuration for club aircraft
WORKS WITH
iris Display Gen 2CAN BUS cable (0.5 m)iris OAT sensoriris layout configuration

You may also like.

iris EFIS Pro 57
PRIMARY INSTRUMENTS
iris EFIS Pro 57
€1,817.80incl. VAT
iris EFIS Pro 80
PRIMARY INSTRUMENTS
iris EFIS Pro 80
€1,817.80incl. VAT
iris all-in-one 80 (for certified aircraft)
PRIMARY INSTRUMENTS
iris all-in-one 80 (for certified aircraft)
€1,647incl. VAT
iris EFIS 57 showing the attitude page with the horizon, speed and altitude tapes and QNH 1025
PRIMARY INSTRUMENTS
iris EFIS 57
€1,525incl. VAT

Details.

The instrument that measures

iris AiO Gen 2 is the second-generation all-in-one instrument: pitot and static connect at the back, and airspeed, altitude and vertical speed come out the front — on a fully round LCD with no covered area. Over the CAN bus it shares its data with every other device in the panel.

Every function is a setting

Configure the face in the built-in WiFi configurator from any phone, tablet or computer: single readout, combined ASI + ALT + VSI, or pages you flip through with the rotary knob. Speed arcs, Vne red line and units follow your aircraft's flight manual, and the configuration can be locked with a password for club aircraft.

In the panel

  • Standard 57 mm cutout — drop-in replacement for a Gen 1 iris or an analog instrument
  • Rotary knob for QNH, pages and menus
  • Optional outside air temperature (OAT) probe
  • Built-in backup battery, at least 3 hours
  • 9–30 V DC, CAN bus, firmware updates over WiFi

Grows with your panel

Pair it with an iris Display Gen 2 for a dedicated airspeed indicator and a dedicated altimeter, or feed any LX navigation CAN system.

Configure and calibrate it yourself

The configuration portal is built into the instrument: connect over WiFi from any phone, tablet or computer and set the face, the arcs, the units and the limits — no CAN2WiFi or any other hardware needed. The same portal calibrates the instrument's airspeed: IAS, TAS and CAS. If you would rather we did the setup, order the iris layout configuration service with it and it arrives ready to fly.