iLevil 3 AW wire harness, 12 ft
The power and data harness for a permanently installed iLevil 3 AW or iLevil AP, in the 12 ft length — for a two-seater or a unit in the tail cone.
- Aircraft power in and RS232 data out for a permanently installed iLevil — 12 ft for the rear of a two-seater, the tail cone, or the far side from the bus
You may also like.
Details.
A portable iLevil runs on its battery. A permanently installed one runs on the aircraft, and this is the harness that makes it: aircraft power to the unit and the RS232 data lines out of it, on open ends ready for the airframe wiring. The 12 ft length is for the long runs — a unit in the rear of a two-seater, in the tail cone, or on the far side of the aircraft from the bus.
What it carries
Power and ground for the unit, and the serial data in and out that connects the iLevil to a panel navigator or an autopilot — the same lines that make the flight plan on the tablet reach the panel.
Also available in 3, 6 and 9 ft. Measure the route before you order; a coiled harness is a harness rubbing on something. Works with the iLevil 3 AW and the iLevil AP.
Questions pilots ask.
Which length do I need?
Measure the route, not the distance — a coiled harness is a harness rubbing on something. 3 ft for a unit next to the panel; 6 ft for most single-seaters; 9 ft for a unit away from the panel; 12 ft for the long runs.


