WeGlide with LX Cloud: flight upload, tasks, segments and Copilot

Connecting your WeGlide account once — in the portal or with a QR code on Navia — automatic flight upload, your WeGlide tasks and nearby segments on Era, Zeus and Colibri, and on Navia the live Copilot layers and racing a segment against the best flight.

6 MIN·ATUALIZADO 11/2026

WeGlide is where many pilots keep their flights, plan their tasks and compare themselves on segments. Connect your WeGlide account to LX Cloud once and your instruments take part in all of it: your flights go to WeGlide by themselves, your WeGlide tasks and nearby segments arrive on the instrument, and on Navia you get WeGlide Copilot's live layers and can race a segment against the best flight ever flown on it.

What you get, instrument by instrument

WhatWhere
Flights uploaded to WeGlideEvery instrument that uploads its flights to LX Cloud
Your WeGlide tasks on the instrumentEra, Zeus and Colibri
Nearby segments as ready-made tasksEra, Zeus and Colibri
Copilot live layers on the mapNavia
Segments on the map, racing against the best flightNavia

You need LX Cloud Premium and your own WeGlide account. The Copilot layers also need a WeGlide Copilot subscription, which you take out with WeGlide.

Connecting your WeGlide account

In the LX Portal. Open Connected services → WeGlide and press Connect WeGlide. The portal shows a short code. Press Confirm at WeGlide, sign in there with your own account, check that WeGlide shows the same code, and confirm. Come back to the portal: the page updates by itself. LX never sees your WeGlide password.

From the cockpit, on Navia. In the side drawer open Layers → WeGlide and log in. Navia shows a QR code and a short code in large type. Scan the QR code with your phone, confirm on WeGlide's page, and Navia picks up the connection by itself. A countdown shows how long the code stays valid; if it runs out, simply start again.

Either way, the connection belongs to your LX Cloud account, not to one instrument: the portal and every Navia on your account use the same one. Connecting again later replaces it.

Your flights on WeGlide

On the WeGlide page in the portal, switch on Send flights automatically. From then on, each new flight your instrument uploads to LX Cloud goes on to your WeGlide profile by itself — flights up to two days old; older ones are left for you to send. The switch starts off, so until you turn it on nothing is sent without you.

You can send any flight by hand from the logbook in the LX Portal — useful for an older flight, or one from before you connected.

Tasks and segments on your instrument

The WeGlide page in the portal has two switches for what goes to the instrument:

  • Send my WeGlide tasks to the instrument — the tasks you plan on WeGlide appear on your instrument, ready to fly.
  • WeGlide segments near where I fly — segments near where you fly arrive on Era, Zeus and Colibri as ordinary tasks, so you can fly them like any other task.

Both arrive on the instrument's next connection to LX Cloud. The segments are picked around the place that instrument last took off from, so they need at least one flight uploaded from it.

Copilot on Navia: live lift on your map

WeGlide Copilot turns the gliders flying right now into two live maps, and Navia draws them over its moving map:

  • Cloud base — how high the thermals of the past hour reached;
  • Net climb — how strongly the air is rising.

Open Layers → WeGlide and switch either layer on. An opacity slider lets the map show through, the legend is shown in your own units, and the layers follow WeGlide as new data arrives.

The layers are built from gliders that are flying, so an empty map is normal — early in the day, late in the season or where nobody is airborne, there is simply nothing to show yet. If Navia says Copilot needs a subscription although you have just taken one out, press Check again — in the portal, I subscribed — check again.

If your WeGlide connection is older than Copilot, it does not include the live layers yet. The portal then offers Enable Copilot: confirm a short code at WeGlide once, and your flight upload carries on as before.

Copilot shows what other gliders are finding in the air. It is not a navigational aid — always verify what you see and fly within your limits.

Segment racing on Navia

WeGlide segments are popular stretches of sky, each with its own leaderboard. On Navia they appear in the same Layers → WeGlide page: switch on Show segments, choose a radius of 100, 200 or 300 km, and the segments around you appear on the map — the start gate in green, the finish gate chequered, the route between them dashed — and in a list, nearest first.

Tap a segment to see its card: the name and length, the Best flight on it (pilot, speed, time and date) and My best, if you have flown it. Where a segment has been flown in both directions, a switch chooses the direction.

Race this segment arms it. Nothing happens until Navia sees you cross the start gate in the race direction. From then on:

  • the best flight replays beside you as a ghost glider, in real time, from the same start;
  • its track shows behind it and where it goes next;
  • Navia tells you whether you are ahead or behind, in seconds, and by how much in distance and height.

At the finish line you get your time and speed, next to the best flight and your own best. That result is unofficial: WeGlide scores the flight after it is uploaded.

The segments around you are kept on the instrument, so racing works in flight with no connection. Your own bests appear only once your WeGlide account is connected, and can take up to about an hour to arrive after you connect.

When something does not appear

What you seeWhy, and what to do
Flights do not reach WeGlideCheck that LX Cloud Premium is active. Then check Send flights automatically — it starts off. Switch it on, and send older flights by hand from the logbook. Flights more than two days old are never sent automatically.
The portal asks you to connect againWeGlide no longer accepts the connection. Press the button on the WeGlide page and confirm a new code.
No WeGlide tasks on the instrumentThe Send my WeGlide tasks to the instrument switch is off, or the instrument has not connected to LX Cloud since you planned the task.
No segment tasks on Era, Zeus or ColibriThe segment switch is off, the instrument has no uploaded flight yet, or there are no WeGlide segments near where it last took off.
Copilot map is emptyNobody is flying in that area right now. This is normal.
Copilot says you need a subscriptionCopilot is a WeGlide subscription. If you have just taken it out, press Check again.
Copilot asks you to log in although WeGlide is connectedThe connection is older than Copilot. Press Enable Copilot on the WeGlide page in the portal, or log in on Navia.
No personal best on a segment cardConnect WeGlide in LX Cloud; your bests then arrive within about an hour.

See also LX Cloud connected services for the other services, and WeGlide on Navia for the overview.

CONTINUAR A LER